Do You Have the Correct Spill Control to Suit Your Site Risks?
Inadequate spill control places your business at risk.
Having a spill kit somewhere on site is a good start, but is it located where it’s actually needed, and does it have enough capacity to deal with the spill risk, in an event of a real emergency?
Too often, when conducting site visits, we find spill risk areas with inadequate spill control, which can be no spill response equipment nearby or spill kits that are simply too small for the potential hazard. This is a common compliance issue that can significantly increase the environmental, operational and financial impact of a spill incident.
Why Are Spill Risk Areas Often Left Unprotected?
In many cases, inadequate spill control isn’t intentional. Sites evolve over time and spill control measures don’t always keep pace with operational changes.
Common inadequate spill control reasons include:
- New processes or installations have introduced additional spill risks.
- Site layouts have changed since the last spill risk assessment.
- Staff changes have resulted in inconsistent spill management practices.
- Teams are unsure where all spill risks exist across the site.
- There is uncertainty about current spill control best practice.
- Existing spill kits have been relocated, used, or not replenished.
Any of these factors can leave high-risk areas vulnerable when a spill occurs.
How Much Spill Response Equipment Do You Actually Need?
There is no simple one-size-fits-all answer. The correct amount of spill equipment depends on the risks present on your site, the liquids being stored or handled, and the potential volume that could be released during an incident. As noted in our previous guidance, the objective is to manage the risk rather than simply placing a spill kit on site and assume you are protected. [spillcraft.co.uk]
For example:
- A site handling several 200-litre drums, opposed to several IBCs may require different sized spill kits, strategically positioned.
- Depending upon the spill risk and where it is sited, will determine if a one-off spill kit is sufficient or if several smaller spill kits would serve the risk better.
- Fuel tanks, chemical transfer points and dispensing stations may justify dedicated spill response equipment assigned specifically to that risk.
The key consideration is whether personnel can quickly access sufficient spill control materials to contain and manage a worst-case spill emergency scenario.
Why Location Matters as Much as Capacity
Even the largest spill kit provides little protection if it is located on the opposite side of the site.
Spill response equipment should be:
- Positioned as close as practical to the spill risk.
- Clearly visible and appropriately signposted.
- Easily accessible during an emergency.
- Suitable for the specific liquid hazard present.
- Maintained and fully stocked at all times.
Where large storage areas exist, multiple smaller spill kits strategically placed around the area can often provide a more effective response solution than a single, large centrally located kit. This approach enables a rapid initial response while additional equipment can be brought to the incident if required.
Spill Kits Are Only Part of the Solution
Emergency spill kits are intended for unexpected incidents such as container failures, vehicle damage or transfer accidents. They should not be routinely used for day-to-day operational leaks. Other spill control measures may be more appropriate depending on the risk, including:
- Spill stations for regular drips and leaks.
- Drain protection near surface water and foul drainage systems.
- Leak diverters for roof leaks.
- Flood defence products for flood-prone areas.
- Secondary containment and bunding for liquid storage areas. [spillcraft.co.uk]
Choosing the correct equipment for each risk helps ensure emergency spill resources remain available when they are genuinely needed.
The Importance of Regular Spill Risk Assessments
Spill risk assessments should not be treated as a one-off exercise.
Regular reviews should be undertaken whenever:
- Site layouts change.
- New equipment is installed.
- Storage volumes increase.
- New liquids or chemicals are introduced.
- Operational processes are modified.
Regular spill risk assessments help identify previously overlooked hazards and ensure spill response equipment remains suitable, sufficient and located in the correct areas.
Is Your Site Properly Protected?
If your spill risk assessment is out of date, or you’re unsure whether your current spill response provisions are adequate, now is the ideal time to review your arrangements.
At Spillcraft, we help businesses identify spill risks, determine the most appropriate spill control solutions and recommend best-practice measures to support environmental compliance and effective emergency response.
Whether you need guidance on spill kit sizing, equipment selection, drain protection or a full site assessment, our experienced team can help ensure your site remains spill safe, compliant and prepared for the unexpected.
Need support assessing your spill risks? Use our helpful and FREE tools – Spill Assessment and Spill Compliance Guide
To discuss your site requirements and receive practical guidance on the most effective spill control measures for your operation, Contact our Team.
What Spill Control to Use?
Understanding what spill products to use, the appropriate spill kit size to suit the risk, where to place spill kits and equipment will keep your business safe and compliant.






![Spill Challenges [5] - inconsistent spill awareness and training](https://spillcraft.co.uk/wp-content/uploads/2026/10/Spill-Challenges-5-training.jpg)